Skip to product information
1 of 3

Dyness Stack 100 PRO Base & Cover Kit C

€304,92 incl. 21% VAT
Shipping calculated at checkout.
In Stock
Freight prepaid delivery (NL/BE) from €5,000 order value
Delivery within 3–7 business days (NL/BE)
Direct technical support
More than 20 years of hands-on experience in PV & energy storage
Net discount conditions for registered partners

The Dyness Stack 100 PRO Base and Cover Kit C is the expansion set for the Stack 100 PRO system in configurations of 13 to 15 battery modules. From 13 modules onwards, Dyness specifies a configuration across two columns. The kit contains an Expansion Base, an Expansion Cover and the necessary series and communication cables for connecting both columns. The kit has an IP66 protection rating and is compatible exclusively with the Dyness Stack 100 PRO series (S51100 Pro).

  • Required for 13 to 15 modules: From 13 modules onwards, Dyness specifies a configuration across two columns. Consult the installation manual for the exact mounting requirements.
  • IP66 protection rating: Protection against dust and powerful water jets in accordance with the product specification.
  • Complete cabling included: Includes series power cables (positive and negative), expansion communication cable and parallel communication cable.
  • Mechanical anchoring: Includes M12 × 100 expansion bolts for floor fixing of the second column.

Expansion Set for 13 to 15 Stack 100 PRO Modules: Base and Cover Kit C

With more than 12 Stack 100 PRO modules, the second column is placed on the Expansion Base. This Base must be anchored to a level surface using the supplied M12 × 100 expansion bolts (tightening torque 30 N·m). The electrical connection between the columns is made via the supplied series power cables, which are routed through the IP66 side covers. The communication link between the two columns is established with the supplied communication cables; follow the port assignment in the installation manual exactly for connection and termination.

Please note: This package contains only the expansion components (Package C). The BDU and Base (Package A) and the battery modules (Package B) are sold separately.

Compatibility requirement: The Stack 100 PRO Base and Cover Kit C is compatible exclusively with the Dyness Stack 100 PRO series (S51100 Pro). The kit is not compatible with the standard Stack 100 series (590 mm wide). Installation must only be carried out by qualified electrical installers in accordance with the installation manual and applicable installation regulations.

Full Technical Specifications: Dyness Stack 100 PRO Base and Cover Kit C

Technical specifications Dyness Stack 100 PRO Base and Cover Kit C
Property Value
Brand and model Dyness Stack 100 PRO Package C
Scope of application 13 to 15 Stack 100 PRO modules
Expansion Base dimensions (W × D × H) 657 × 460 × 133 mm
Expansion Cover dimensions (W × D × H) 657 × 460 × 159 mm
Protection rating IP66
Tightening torque M5 screws 2.5 N·m
Tightening torque M12 bolts 30 N·m
Compatibility Dyness Stack 100 PRO series (S51100 Pro) only

Dyness's official datasheet and installation manual take precedence for technical specifications, installation and use.

Frequently asked questions about the Dyness Stack 100 PRO Base and Cover Kit C

What is included in the Dyness Stack 100 PRO Base and Cover Kit C package?
Scope of delivery Dyness Stack 100 PRO Base and Cover Kit C (Package C)
Component Quantity
Expansion Base (657 × 460 × 133 mm) 1
Expansion Cover (657 × 460 × 159 mm) 1
Hexagon socket screw M5 × 30 4
Insulating cap 4
Expansion communication cable 1
Parallel communication cable 1
Series power cable negative 1
Series power cable positive 1
Expansion bolt M12 × 100 4

BDU and Base (Package A) and battery modules (Package B) are not included and are sold separately.

Is this kit compatible with the standard Stack 100 series?

No. The Stack 100 PRO Base and Cover Kit C is compatible exclusively with the Dyness Stack 100 PRO series (S51100 Pro). The 657 mm width and the IP66 interfaces are specific to the S51100 Pro modules. For the standard Stack 100 series (590 mm wide), the dedicated expansion set must be used.

When is Kit C mandatory?

From 13 Stack 100 PRO modules onwards, Dyness specifies a configuration across two columns. Kit C supplies the Expansion Base, Expansion Cover and cabling required for this arrangement. Consult the official installation manual for the exact mounting requirements and tightening torques.

Discover more products in our Dyness home batteries collection.

Activate your installer account

Verify your company within 12 hours and gain immediate access to professional net pricing, engineering support and live EU inventory.

Fast-Track Authorization: Manual business verification and activation within 12 hours.
Professional Net Pricing: Direct purchasing rates for Aiko, Jinko, BYD, Solis and more.
Technical Authority: Senior engineering support with 20+ years of PV and storage expertise.
View full details
Dyness Stack 100 PRO Base & Cover Kit C – General installation or product video