All Hybrid Inverters

A hybrid inverter converts the direct current from your solar panels into alternating current and, at the same time, charges and discharges a home battery. It is the heart of any system with energy storage: the inverter determines which batteries you can connect, how much power is available and whether you have backup power. This overview shows the full Rebor range from Solis, Pylontech and Anker SOLIX, from 3 kW single-phase for homes to 125 kW three-phase for commercial roofs.

Choose a hybrid inverter in this order: first your grid connection (single-phase, 3x400 V or 3x230 V), then the battery voltage (low-voltage 48 V or high-voltage), then the power rating and finally features such as backup, dynamic tariffs and monitoring.

System selection

Which hybrid inverter suits your installation?

Inverter and battery form a single system. Always check first that the exact inverter model officially supports the chosen battery, including firmware and communication. A shared CAN or RS485 protocol does not guarantee compatibility.

View the compatibility guide →

Hybrid inverters by brand and series: from 3 kW to 125 kW

The key distinction is the combination of phase connection and battery voltage. Within one brand there are often separate variants for low-voltage and high-voltage batteries.

Overview of the current hybrid inverter range
Series Grid and battery Power ratings in range Typical application
Solis S6-EH1P-L-PLUSSingle-phase, low voltage (48 V)3 to 10 kWHomes with a single-phase connection and a 48 V home battery.
Solis S6-EH3P-HThree-phase, high voltage5 to 15 kW (residential), 20 to 50 kW (commercial)Homes and businesses with a three-phase connection and an HV battery.
Solis S6-EH3P-NV-YD-LThree-phase, low voltage (48 V)8 to 18 kWThree-phase systems using a 48 V battery.
Solis S6-EH3P-LV-ND-H and K2-H3x230 V grid, high voltage8 to 15 kWBelgian and other 3x230 V grids without a neutral conductor.
Solis S6-EH3P C&IThree-phase, high voltage100 and 125 kWCommercial and industrial storage projects.
Pylontech FH3XSingle and three-phase, combined with Pylontech batteries3.6 and 5 kW (single-phase); 10, 12 and 15 kW (three-phase)For those who want inverter and battery from one manufacturer, with Force H3 storage.
Anker SOLIX X1Single and three-phase, all-in-one with X1 battery modules3.68 and 4.6 kW (single-phase); 5 to 12 kW (three-phase)Complete modular system with its own app and battery modules.

Important: this table is intended for an initial choice. Number of MPPTs, maximum PV input, backup power, battery voltage range and country-specific certifications are listed on each product page and in the official manufacturer documentation.

Which hybrid inverter suits your grid connection?

Decision matrix at system level
Starting point Logical first direction Then check
Single-phase connection, 48 V battery wantedSolis S6-EH1P-L-PLUS or Anker SOLIX X1 single-phasePermitted inverter power on your connection, battery model and backup needs.
3x400 V connection, HV batterySolis S6-EH3P-H, Pylontech FH3X or Anker SOLIX X1 three-phaseBattery voltage window, number of modules and required charging power.
3x400 V connection, 48 V batterySolis S6-EH3P-NV-YD-LBattery charge and discharge current and number of parallel modules.
3x230 V grid (common in Belgium)Solis S6-EH3P-LV-ND-H or the Belgian K2-H versionGrid type at your address and local connection requirements.
Commercial roof or storage project above 20 kWSolis S6-EH3P 20–50 kW or 100–125 kW C&IConnection capacity, battery system, grid operator requirements and project design.
Please note: an inverter for a 48 V battery does not work with a high-voltage battery and vice versa. Also check whether the grid at your address is 3x400 V or 3x230 V.

Battery compatibility: inverter and battery as one system

The choice of hybrid inverter determines which home batteries you can use. Always check the combination of the exact inverter model and exact battery model in the official compatibility list.

  • Battery voltage: LV inverters (48 V) and HV inverters each require their own battery type.
  • Voltage window: with HV, the chosen battery configuration must fall within the inverter's battery voltage range.
  • Charging power: the inverter can limit charge and discharge power, even if the battery can handle more.
  • Energy meter: self-consumption control and zero export require a suitable smart meter or CT measurement.
  • Backup: emergency power requires a backup or EPS output and sometimes a separate backup box.

Combined with Solis AI, Solis hybrid inverters support smart energy management with dynamic tariffs. Read more in our article on Solis AI for the Netherlands and Belgium.

Installation and system design

A hybrid inverter is part of a complete energy system with solar panels, battery, energy metering and optional backup. Match PV power, MPPT layout and battery power to each other and check the connection requirements of your grid operator. Installation must only be carried out by qualified installers, in accordance with the manufacturer documentation and applicable installation regulations.

Frequently asked questions about hybrid inverters

What is the difference between a hybrid inverter and a standard inverter?

A standard (string) inverter only converts solar power. A hybrid inverter also has a battery input and controls the charging and discharging of a home battery, often with a backup function. If you want a battery now or later, a hybrid inverter is the logical choice.

Do I need a single-phase or three-phase hybrid inverter?

That follows from your grid connection. With a three-phase connection you can feed in more power and the load is spread across the phases. With a single-phase connection the permitted inverter power is more limited. Also check whether your three-phase grid is 3x400 V or 3x230 V.

Can I use a hybrid inverter without a battery at first?

Yes. Most hybrid inverters also work without a battery as a regular solar inverter. You can add the battery later, provided you choose a battery that is officially compatible with the inverter model.

What size hybrid inverter do I need?

Inverter size is determined by PV power, grid connection, the desired battery charge and discharge power and backup requirements. Slightly oversizing the PV array relative to the inverter is common, within the manufacturer's limits.

Does a hybrid inverter work during a power outage?

Only if the model has a backup or EPS output and it is connected correctly. Without a backup function, the inverter shuts down during a grid outage for safety reasons, even if the battery is full.

Choosing your hybrid inverter

Not yet sure which inverter suits your grid connection, battery and solar panels? Check compatibility or have the complete system reviewed before you order.