Pylontech Home Batteries – Reliable LiFePO4 Energy Storage

Smart battery advice

Which Pylontech home battery suits your situation?

Calculate the recommended battery capacity based on your consumption, solar panels and energy contract — and automatically discover suitable Pylontech products from the current Rebor range.

Start the battery calculator →

Pylontech home batteries are among the most widely chosen LiFePO4 energy storage systems for homes and commercial installations worldwide. With more than 1 million energy storage systems installed in 80+ countries — which made Pylontech the global market leader in residential battery storage in 2022 — CE and IEC62619 certification and a modular capacity range from 2.4 kWh (US2000C, 1 module) to 35.84 kWh per Force H3 tower, Pylontech offers a proven and scalable solution for installers and homeowners. Rebor supplies Pylontech directly from stock to installers and private customers in the Netherlands, Belgium (installers only) and the rest of Europe.

With the phase-out of the Dutch net-metering scheme and the rise of dynamic energy contracts, a high-quality home battery is becoming increasingly relevant: you use more of your self-generated solar power and export less at low feed-in tariffs. Discover the complete range of Pylontech home batteries, including the popular Force H3 high-voltage series — compatible with hybrid inverters from Solis, GoodWe, Victron Energy, Growatt, Deye, SMA, SOFAR and SolaX.

Key specifications at a glance

  • Cell technology: LiFePO4 (cobalt-free, thermally stable)
  • Capacity range: 2.4 kWh (US2000C, 1 module) — 3.55 kWh (US3000C, 1 module) — 10.24–35.84 kWh (Force H3, min. 2 modules, max. 7 modules per tower)
  • Service life: ≥6,000 cycles at 90% DoD (US series / Force H1) — ≥8,000 cycles at 95% DoD (Force H3)
  • System efficiency: >95%
  • Voltage levels: LV (48V, US series) — HV (Force H1/H3)
  • Communication: CAN / RS485
  • Protection rating: IP20 (US series / Force H1, indoor) — IP55 (Force H3, indoor and outdoor)
  • Certifications: CE, IEC62619, UN38.3, UL1973, IEC63056, VDE-AR-E2510-50 (Force H3)
  • Warranty: 10-year product warranty
  • Operating temperature: -10°C to +50°C (US series / Force H1) — -10°C to +55°C (Force H3)
📢 Update — July 2026: Pylontech compatibility list updated

The official compatibility list for Pylontech ESS & Inverters has been updated with new inverter models. Always check the latest version before installation: 📘 Pylontech Compatibility List ESS & Inverters (PDF).

Model comparison: US series, Force H1 and Force H3

Pylontech offers several product lines for residential and light commercial energy storage. The table below compares the technical differences side by side, based on the official Pylontech Force H3 Operation Manual (v1.2) and Pylontech product documentation.

Feature US2000C / US3000C (LV) Force H1 (HV) Force H3 (HV)
Voltage level Low Voltage (48V) High Voltage High Voltage
Capacity per module 2.4 kWh (US2000C) / 3.55 kWh (US3000C) 3.55 kWh 5.12 kWh
Min. system capacity 2.4 kWh (1 module US2000C) 7.10 kWh (2 modules) 10.24 kWh (2 modules — minimum in accordance with the official Force H3 Operation Manual)
Max. system capacity (1 tower) Up to 8 modules in parallel (US series) 2–7 modules (7.10–24.86 kWh) 2–7 modules (10.24–35.84 kWh)
Service life (cycles / DoD) ≥6,000 at 90% DoD ≥6,000 at 90% DoD ≥8,000 at 95% DoD
Protection rating IP20 (indoor) IP20 (indoor) IP55 (indoor and outdoor)
Operating temperature -10°C to +50°C -10°C to +50°C -10°C to +55°C
Communication CAN / RS485 CAN / RS485 CAN / RS485
Application Residential LV — broad inverter compatibility Residential HV — compact installations Residential HV premium — indoor and outdoor, longest service life

The Force H3 stands out with the longest service life in the Pylontech line-up (≥8,000 cycles at 95% DoD), IP55 protection for indoor and outdoor installation, and a capacity range of 10.24–35.84 kWh per tower (2–7 modules, in accordance with the official Force H3 Operation Manual). The US series (48V LV) is suitable for installations where the inverter has no native HV input.

Technology: LiFePO4 (cobalt-free, thermally stable).
Service life: ≥8,000 cycles at 95% DoD (Force H3).
Efficiency: >95% system efficiency.
Scalable: Force H3 from 10.24 to 35.84 kWh per tower (2–7 modules).
Safety: Intelligent Battery Management System (BMS).
Compatibility: Broadly compatible, including Solis and GoodWe.

Decision matrix — which Pylontech system suits your situation?

Use the matrix below to quickly select the right Pylontech system based on your specific situation and inverter.

Situation Recommended system Benefit
Average household, Solis or GoodWe HV inverter Force H3 — 10.24 kWh (2 modules, minimum) Compact HV solution, IP55, longest service life
Home with heat pump or EV charger, HV inverter Force H3 — 15.36–25.60 kWh (3–5 modules) Higher capacity for additional loads
Maximum capacity per tower, HV inverter Force H3 — 35.84 kWh (7 modules) Highest capacity per tower in the Pylontech HV line-up
Inverter without native HV input US3000C — 3.55 kWh per module (48V LV) Broad LV compatibility, proven reliability
Outdoor installation or unheated space Force H3 (IP55, up to +55°C) Weather-resistant — suitable for outdoor installation
Dynamic energy contract, maximum self-consumption Force H3 — 20.48–35.84 kWh (4–7 modules) Higher capacity for price arbitrage, ≥8,000 cycles
Expanding an existing US series installation Additional US2000C or US3000C modules (same type) Modular expansion within the existing LV system
Entry-level HV installation, expand later Force H3 — 10.24 kWh (2 modules, expandable to 35.84 kWh) Lowest HV entry price, modular expansion

Tip: Not sure which capacity best suits your consumption profile? Use our free battery calculator for personalised, tailored advice.

Compatibility & installation

Compatible inverters

Pylontech batteries are compatible with a wide range of hybrid inverters via CAN or RS485 communication, including:

Always check the latest Pylontech Compatibility List ESS & Inverters (PDF) before installation.

Step-by-step installation instructions

Force H3 — high-voltage installation
  1. Check that your inverter is on the official Pylontech compatibility list.
  2. Determine the required number of modules (at least 2 modules required, 10.24–35.84 kWh — in accordance with the Pylontech Force H3 Operation Manual v1.2).
  3. Mount the modules in the tower in accordance with the Pylontech Force H3 Operation Manual (v1.2).
  4. Connect the DC power cables to the HV input of the inverter.
  5. Connect the CAN or RS485 communication cable between the Force H3 BMS and the inverter.
  6. Select the correct battery family in the inverter settings ("Pylontech" or "Lithium HV").
  7. Start up the system in the correct order: switch on the battery first, then the inverter.
  8. Use the inverter app (e.g. SolisCloud or GoodWe SEMS Portal) to check that the battery is correctly recognised and the SOC is visible.
⚠️ Safety: HV battery systems can carry dangerous voltages. Work may only be carried out by certified installers. Fully isolate the system before starting any work and wear PPE in accordance with local standards (NEN/AREI).
US series — low-voltage installation (48V)
  1. Check that your inverter is on the official Pylontech compatibility list.
  2. Determine the required number of modules (US2000C: 2.4 kWh/module; US3000C: 3.55 kWh/module, max. 8 modules in parallel).
  3. Connect the modules in parallel to the 48V LV input of the inverter.
  4. Connect the CAN or RS485 communication cable — the master module communicates with the inverter on behalf of all parallel modules.
  5. Select the correct battery family in the inverter settings ("Pylontech" or "Lithium LV").
  6. Start up the system: battery first, then inverter.
  7. Check that the total system capacity is displayed correctly in the inverter app.

Popular applications

  • Home with solar panels — maximising self-consumption
  • Solar panels + heat pump — higher capacity recommended (Force H3 ≥15 kWh)
  • Solar panels + EV charger — flexible charging with self-generated energy
  • Dynamic energy contract — charge at low tariffs, discharge at high tariffs
  • Outdoor installation or unheated space — Force H3 (IP55, up to +55°C)

🔧 Pylontech troubleshooting & diagnostic protocol

Note: The diagnostic information below is based on the official Pylontech Force H3 Operation Manual (v1.2) and the practical experience of installers. A single documented case is not proof of a structural product defect. For persistent faults, always contact the official Pylontech service organisation via your installer or via Rebor.

Common faults and solutions

Battery not recognised by the inverter

Symptom: The inverter shows no battery data, BMS communication fails, or the battery does not appear in the inverter app.

Step-by-step diagnosis:

  1. Check that the correct communication protocol is selected in the inverter (CAN or RS485 — depending on the inverter model and Pylontech series).
  2. Check the communication cable: are CAN High/Low or RS485 A/B correctly connected to the right port of the Pylontech BMS module?
  3. Check that the correct battery family is selected in the inverter settings (e.g. "Pylontech" or "Lithium HV/LV").
  4. Check the start-up sequence: the battery must be switched on before the inverter.
  5. For the US series, check that the master module is configured correctly — only the master communicates with the inverter via CAN/RS485.
  6. Restart the system in the correct order after every change.

Specific to Solis inverters: Select the correct battery family in the Solis settings and check the BMS port setting. See the Solis inverter product page for compatibility information.

Specific to GoodWe inverters: Check the BMS protocol setting in the SEMS Portal. See the GoodWe inverter product page for compatibility information.

No power output, no LED — Force H3

Symptom: The system delivers no power and no LED indication is visible on the modules.

Diagnosis (in accordance with the Pylontech Force H3 Operation Manual v1.2):

  1. Check the number of modules: the Force H3 requires at least 2 modules for a supported configuration. An installation with only 1 module is not supported and may result in no power output.
  2. Check that the battery's main switch is switched on.
  3. Check the DC connections between the modules and the inverter for damage or loose contacts.
  4. Check that the inverter was started up correctly after the battery.
⚠️ Safety: Fully isolate the system before inspecting DC connections. HV battery systems can carry dangerous voltages, even after the inverter has been switched off.
Alarm LED lit or system switches to protection mode

Symptom: A red or orange LED on the BMS module is lit or flashing. The system no longer charges or discharges.

Step-by-step diagnosis:

  1. Read out the fault code via the inverter app (e.g. SolisCloud or GoodWe SEMS Portal) — the Pylontech BMS communicates fault codes via the inverter.
  2. Consult the fault code table in the Pylontech Force H3 Operation Manual (v1.2) for the specific meaning of the fault code.
  3. Check the cell voltages via the BMS interface — are there any modules with deviating voltage?
  4. Check the ambient temperature — the Force H3 operates optimally between -10°C and +55°C; the US series and Force H1 between -10°C and +50°C (according to the official Pylontech product documentation).
  5. Check all connections and the BMS module for damage or loose contacts.

Most common causes:

  • Overvoltage or undervoltage on a module → cell balancing required
  • Temperature outside the operating range → check installation location and ventilation
  • BMS ↔ inverter communication fault → check cabling and protocol setting
  • Incorrect start-up sequence → restart the system in accordance with the installation manual
⚠️ Safety: Fully isolate the system before inspecting internal connections. HV battery systems can carry dangerous voltages, even after the inverter has been switched off.
Battery does not charge fully or SOC display is incorrect

Symptom: The battery never reaches 100% SOC, or the displayed SOC differs from the actual state of charge.

Diagnosis and solution:

  1. Check that the charging voltage in the inverter is set correctly in accordance with the Pylontech specifications for your model.
  2. Perform a full charge/discharge cycle to reset the SOC calibration.
  3. Check that the inverter sets the correct maximum charging current — an excessive charging current can put the BMS into protection mode.
  4. For the US series, check that all parallel modules are of the same type and have the same firmware version.
  5. Check the cell balance via the BMS interface — large SOC deviations between modules may indicate a balancing problem.

Persistent SOC deviations after several full cycles: consult the Pylontech Force H3 Operation Manual or contact us via Rebor.

US series: slave modules not visible in the system

Symptom: Only the master module is visible in the inverter app. Slave modules are not displayed as separate units.

Explanation: This is correct system behaviour for Pylontech US series parallel installations. Only the master module communicates with the inverter via CAN/RS485. Slave modules appear via the master's aggregated BMS information. The total capacity and SOC are reported correctly via the master.

Check that the total system capacity (kWh) matches the expected number of modules × capacity per module. Also check that all modules are connected via the correct parallel cabling.

Diagnostic checklist

  • ☐ Pylontech model (Force H3 / Force H1 / US series) and inverter model recorded
  • ☐ Number of modules checked (Force H3: at least 2 modules required)
  • ☐ Battery and inverter firmware versions checked
  • ☐ Correct battery family selected in the inverter
  • ☐ Communication cable (CAN/RS485) correctly connected
  • ☐ Start-up sequence checked (battery first, then inverter)
  • ☐ Master module correctly configured (US series)
  • ☐ Fault code read out via the inverter app
  • ☐ Cell voltages checked via the BMS interface
  • ☐ Ambient temperature checked (Force H3: -10°C to +55°C; others: -10°C to +50°C)
  • ☐ Compatibility list consulted for the inverter model
  • ☐ Pylontech Force H3 Operation Manual (v1.2) consulted
  • ☐ Service ticket raised with the Pylontech service organisation if required

Frequently asked questions about Pylontech home batteries

Which Pylontech Force H3 capacity do I need?

The right capacity depends on your electricity consumption, solar panels, heat pump, electric car and future expansion plans. As a guideline: 10.24 kWh (2 modules, minimum) for an average household that wants to cover its night-time consumption; 15–25 kWh for homes with a heat pump or EV charger. The Force H3 series is available in 2–7 modules (10.24–35.84 kWh). Calculate your personal battery advice with our free battery calculator.

How do I determine which Pylontech home battery capacity I need?

For most homes it is not necessary to store all the solar power generated. In practice, a Pylontech home battery is usually chosen on the basis of average night-time consumption. The Force H3 is fully modular: if your energy consumption increases later due to a heat pump, electric car or additional solar panels, you can easily expand the capacity by adding modules (minimum 2, maximum 7 modules per tower, 10.24–35.84 kWh). If you plan to use a dynamic energy contract for price optimisation, you can deliberately opt for a larger capacity — bear in mind that more intensive use results in more charge cycles per year. Calculate your optimal capacity with our battery calculator.

Can I expand my Pylontech home battery later?

Yes. Thanks to the modular design, the storage capacity can easily be expanded. The Force H3 supports 2–7 modules per tower (10.24–35.84 kWh). The US series supports up to 8 modules in parallel. Expansion is possible with modules of the same type — do not mix US2000C and US3000C modules in the same parallel configuration. This allows your energy system to grow with you as your electricity consumption or solar installation increases in the future.

Is a Pylontech home battery safe?

Yes. Pylontech uses safe LiFePO4 cells with an intelligent Battery Management System that continuously monitors voltage, temperature and state of charge. LiFePO4 technology is thermally stable and has a significantly lower risk of thermal runaway than NMC cells. All Pylontech systems are CE and IEC62619 certified; the Force H3 is additionally certified to UL1973, IEC63056 and VDE-AR-E2510-50.

Which inverters work with Pylontech batteries?

Pylontech batteries are compatible with a large number of hybrid inverters, including Solis, GoodWe, Victron Energy, Growatt, Deye, SMA, SOFAR and SolaX. Always check the current Pylontech compatibility list (PDF) and firmware version before installing a system.

What is the difference between the Pylontech US series and the Force H3?

The US series (US2000C: 2.4 kWh/module; US3000C: 3.55 kWh/module) operates at 48V (low voltage) and is compatible with a wide range of inverters without a native HV input. The Force H3 is a high-voltage system with 5.12 kWh per module, a minimum configuration of 2 modules (10.24 kWh), IP55 protection for indoor and outdoor installation, an operating temperature range up to +55°C and the longest service life in the Pylontech line-up: ≥8,000 cycles at 95% DoD. The Force H3 is the most requested series for new residential installations in the Rebor range.

Downloads & warranty

Check the official documentation for a correct system configuration:

Warranty at a glance:

  • Product warranty: 10 years
  • Service life: ≥6,000 cycles at 90% DoD (US series / Force H1) — ≥8,000 cycles at 95% DoD (Force H3)
  • Certifications: CE, IEC62619, UN38.3, UL1973, IEC63056, VDE-AR-E2510-50 (Force H3)
  • Service: via your installer or via Rebor

Not sure which Pylontech home battery best suits your home? Use our battery calculator for personalised, tailored advice, or contact our product specialists via the contact page.

Also compare Pylontech with other home battery brands in our range: BYD, Dyness or Anker SOLIX.