Dyness Home Batteries & Storage Systems

Dyness battery storage and energy storage systems are available for both low-voltage and high-voltage applications, ranging from compact residential batteries to scalable systems for larger homes and commercial energy projects. The current Rebor range includes the PowerBrick, Powerbox and DL series for low-voltage systems, the modular high-voltage Stack 100, Stack 100 PRO, Stack 280 and Stack 314 systems, and the Tower S3 and Tower Pro ranges.

Choosing the right Dyness system is not simply a matter of selecting the required storage capacity. The inverter architecture, low- or high-voltage battery input, charge and discharge requirements, scalability, communication and installation environment must also match the project. Use this page to select the appropriate product family first. The exact configuration, technical specifications and system requirements can then be checked on the relevant product page.

System selection

Which Dyness battery storage system fits your energy system?

Start with your consumption profile and required storage capacity. Then verify that the battery, inverter, communication method and system voltage are technically compatible. A shared CAN or RS485 protocol does not automatically mean that two products are compatible.

Start the battery calculator →

Dyness product families: from 48 V battery storage to scalable HV systems

The most important distinction within the Dyness portfolio is the system architecture. First choose between low voltage (LV) and high voltage (HV), then determine which system format and level of scalability best suit the project.

Overview of the current Dyness product families
Product family Architecture Particularly relevant for Key selection points
PowerBrick / Powerbox Low voltage Residential and scalable LV storage systems with a compatible low-voltage inverter. Exact inverter model, battery profile, communication and required energy metering.
DL series Low voltage Modular LV storage systems where compact battery modules are preferred. Model variant, expansion method, inverter compatibility and required accessories.
Stack 100 / Stack 100 PRO High voltage, modular stack system Residential and larger HV systems requiring modular storage capacity. BDU/Base, number of modules, system voltage, inverter compatibility and Kit C for larger configurations.
Stack 280 / Stack 314 High voltage, large-format stack system Large residential properties, smaller commercial projects and other applications with higher storage requirements. Modules per column, BDU/Base, floor loading, installation environment and the inverter's required battery voltage range.
Tower S3 High voltage, tower system Residential HV storage with a compact and modular tower configuration. TS7 to TS21 configuration, BMS/Base, inverter model, firmware and communication.
Tower Pro High voltage, tower system HV projects where the higher module capacity and specific system features of the Tower Pro series are required. TP7 to TP23 configuration, BDU/Base, inverter compatibility, installation environment and, where applicable, parallel system architecture.

Important: This overview is intended for initial system selection. Product-specific values such as current, power, dimensions, weight, IP rating, cycle life, warranty, certifications and maximum expansion should be checked on the relevant product page and in the official Dyness documentation.

Which Dyness system fits your project?

System-level selection matrix
Starting point Logical first selection Then verify
Compatible 48 V/LV inverter or planned LV system PowerBrick, Powerbox or DL series Exact battery and inverter model, communication, firmware and energy metering.
Residential HV system with a modular tower format Tower S3 or Tower Pro Required configuration, inverter battery voltage range, power requirements and installation environment.
HV system with stackable battery modules Stack 100 or Stack 100 PRO BDU/Base, module count, system voltage and, where required, multi-column expansion.
Higher storage requirement or large residential/smaller commercial project Stack 280 or Stack 314 Floor loading, available space, module distribution, inverter architecture and required system performance.
Expanding an existing Dyness installation Remain within the existing product family and system architecture Exact model, generation, BMS/BDU, firmware, maximum configuration and official expansion requirements.
Selection note: Do not select a battery solely by its kWh capacity. A system may appear suitable in terms of storage capacity while still being incompatible with the selected inverter, battery voltage range or communication architecture.

Compatibility: battery, inverter and communication must work together as one system

Dyness systems are used with various hybrid and battery inverters. Compatibility must always be verified at the level of the exact battery model and exact inverter model. A manufacturer name or shared communication protocol is not sufficient to confirm compatibility.

  • Check LV or HV: A low-voltage battery must not be selected for a high-voltage battery input, and vice versa.
  • Check the voltage range: For HV systems, the selected battery configuration must remain within the inverter's permitted battery voltage range.
  • Check model and firmware: Compatibility may depend on firmware, battery profile, protocol selection and system settings.
  • Check required components: Some Dyness systems require a specific BMS or BDU, Base, energy meter, CT configuration or expansion kit.
  • Check expansion separately: The maximum possible number of battery modules or towers does not automatically mean that the connected inverter supports that configuration.

Inverter brands used in Dyness system applications include Solis, GoodWe and other manufacturers. Before ordering and installation, always check the current official compatibility documentation for the selected battery series and exact inverter model.

Parallel systems: Communication between battery systems and DC power distribution are separate functions. Daisy-chain communication therefore does not automatically mean that no additional DC combining or other system component is required. For parallel configurations, always follow the official Dyness system architecture and the limits of the connected inverter.

Installation and system design

A Dyness battery is part of a complete energy system. The final installation is determined by the selected battery series, inverter, system voltage, cabling, energy metering, communication and required functions such as self-consumption optimisation, backup power or power management.

Before installation, check the product-specific Dyness manual for installation conditions, electrical connections, required clearances, temperature limits, mechanical installation and commissioning. High-voltage battery systems should only be installed by appropriately qualified electrical professionals in accordance with the manufacturer's documentation and the regulations applicable at the installation location.

Frequently asked questions about Dyness battery storage

Which Dyness battery storage system do I need?

Start with the system architecture. If you use or plan a 48 V low-voltage inverter, the appropriate Dyness LV ranges are relevant. If your inverter has a high-voltage battery input, the Tower and Stack families are the logical starting point. Then determine the required storage capacity and verify the exact inverter model, battery voltage range, power requirements, communication and any additional system components.

Use the battery calculator for an initial capacity recommendation.

What is the difference between Dyness low-voltage and high-voltage batteries?

Dyness low-voltage solutions include product families such as PowerBrick, Powerbox and the DL series. Tower S3, Tower Pro and the Stack ranges are high-voltage systems. The appropriate architecture is largely determined by the battery input and permitted battery voltage range of the selected inverter. LV and HV battery architectures are therefore not interchangeable.

Can I expand a Dyness battery system later?

Many Dyness systems are modular and can be expanded, but the expansion rules differ by product family. Before expanding an existing installation, verify the exact battery model, current system configuration, BMS or BDU, firmware, maximum module or tower configuration and the limits of the connected inverter. Only use combinations approved by Dyness for the relevant series.

Does every Dyness battery work with every hybrid inverter?

No. CAN or RS485 being available on both products does not automatically confirm compatibility. Always verify that the exact Dyness battery model and exact inverter model are officially supported together, including any required firmware versions, settings, communication cables and battery profiles.

Which Dyness range is suitable for larger energy storage systems?

For larger storage projects, the scalable HV families are particularly relevant, including Stack 280, Stack 314 and, depending on the project, Tower Pro. The correct choice depends not only on required storage capacity, but also on power requirements, system voltage, available space, floor loading, inverter architecture and the permitted parallel configuration.

Can Dyness be used for self-consumption, dynamic tariffs or peak shaving?

These are possible applications of a correctly designed battery storage system. The functions actually available also depend on the connected inverter, energy metering, EMS and system configuration. The complete energy system should therefore be assessed for the required control strategy rather than the battery alone.

Select your Dyness system

Not sure which Dyness product family is technically suitable for your project? Use the battery calculator for an initial capacity recommendation, or have the combination of battery, inverter and system architecture checked before ordering.